JDSU NT850 Betriebsanweisung PDF herunterladen (Seite 83)

Chapter 6 Interpreting Test Results

Status and Error Messages for Network Tests

LanScaperPRO Network Tester User’s Guide 67

Link word Err

The link word captured by the LanScaperPRO during Port

Discovery test from an attached Ethernet device was

decoded improperly by the tester. May indicate a cable

problem, or a hardware problem with the connected

device.

Lost Link

A test was active, after having found incoming link pulses,

but they stopped being received, possibly due to the cable

being disconnected or the connected device being shut

off.

NE64 no response

The Ethernet interface chip used in the LanScaperPRO

reported a problem to the CPU during internal communi-

cation. May be caused by a hardware problem inside the

tester.

No IP address

The DHCP server responded to the tester DHCP request,

but did not provide an IP address for MyIP.

Packet Rcv Err

An Ethernet packet was received by the LanScaperPRO

with errors in the header or packet data. May be caused

by excessive signal noise on the Ethernet cable or a hard-

ware problem with the device transmitting to the tester.

LanScaperPRO_User_Guide.book Page 67 Friday, January 25, 2008 1:14 PM

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 105 106

Keine Kommentare

JDSU NT850 Betriebsanweisung Seite 83