JDSU TP350 Betriebsanweisung PDF herunterladen (Seite 19)

with correct continuity but not with correct

pairing. This most often happens when

the cable is terminated consistently at both

ends, but in the wrong order. A dynamic

or AC test is required to detect this type of

error. If the only error is a split pair error,

the cable has correct continuity. If cross

talk is not a concern, as in flat satin

cable, the cable is good if the only error

is the split pair error. The Split icon and

the pin numbers on the first and second line

of the wire map with split pairs flash when

there is a split pair error.

Testifier™ has the ability to turn off the split

pair error testing. Pressing the button for

the current cable test mode for more than 2

seconds turns off the split pair testing. The

“Split” icon and the word “OFF” appears on

the screen briefly to indicate this. The split

pair testing will resume the next time the

tester is turned on, or may be toggled back

on by another 2 second press of the current

test mode button.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Keine Kommentare

JDSU TP350 Betriebsanweisung Seite 19